Moxa NPort 5650-8-DT 8-Port Rackmount Device Server

Login to see pricing

SKU: NPort 5650-8-DT

Moxas serial-to-Ethernet products are designed to make industrial devices accessible directly from the network. Legacy devices can thus be converted into Ethernet devices that can be monitored and controlled from any network location or even the Internet. Different configurations and features are available for specific applications, including protocol conversion, Real COM drivers, TCP operation modes, and more.


Network Readiness for up to 16 Serial Devices

Only basic configuration is needed with the NPort® 5650 to connect up to 16 serial devices to an Ethernet network.


19-inch Rackmount Device Server

NPort® 5650 device servers come with Tx/Rx LEDs for the serial ports on the front panel, and 8 or 16 RJ45 serial port connectors on the rear panel. This makes the NPort® 5650 device servers suitable for standard 19-inch rack mounting, allowing you to simplify operational, maintenance, and administrative tasks.


Real COM/TTY Ports

Real COM/TTY drivers are provided to make the serial ports on the NPort® 5650 recognisable as Real COM ports by Windows, or Real TTY ports by Linux. In addition to supporting basic data transmission and reception, the NPort® drivers also support the RTS, CTS, DTR, DSR, and DCD control signals.


LED Indicators to Ease Your Maintenance Tasks

The System LED, serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help engineers analyse problems in the field. The LEDs not only indicate current system and network status, but also help field engineers monitor the status of attached serial devices.


Adjustable Termination and Pull High/Low Resistors

When using termination resistors to prevent serial signal reflection, it is important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible for all environments, the NPort® 5650-8/16 has DIP switches on the bottom panel for setting the termination and pull high/low resistor values.

Ports1x 10/100 Ethernet
Operating TemperatureStandard models = 0°C to 60°C / Wide temp. models = -40 to 75°C / High-voltage wide temp. models = -40 to 85°C
Power Requirement100 to 240v AC or 88 to 300v DC
HousingMetal
Dimensions (mm)440 x 45 x 198 (without ears), 480 x 45 x 198 (with ears)